Do you want to install Stock ROM on ASUS Zenfone Max Pro M2 (ZB630KL | ZB631KL)? then, you are in the right place. Here we will share all the latest ASUS Zenfone Max Pro M2 Stock Firmware Collections.

As we know, Android is one of the highly customizable software and there is a possibility that we may end up in a situation of lag, boot loop or soft brick. Then, this guide will be helpful. It is always good to keep the ASUS Zenfone Max Pro M2 Stock Firmware with you in case something went wrong. Here we have shared the full list of firmware links to download and install stock firmware on ASUS Zenfone Max Pro M2 (ZB630KL | ZB631KL).

If anyone faces problems like Screen freezing, unresponsive Touch, camera fail or boot loop, you can factory reset or flash the latest ASUS Zenfone Max Pro M2 Stock Firmware. Check the other advantage of Stock Firmware given below.

Also Read

List of Best Custom ROM for Asus Zenfone Max Pro M2 [Updated]

Download and Install AOSP Android 13 on Asus Zenfone Max Pro M2

If you have bought this device and looking for the fresh installation of Stock ROM, then you can simply grab the download link and flash the firmware on your phone by following the guide.

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today’s date, rooting or customizing is no rocket science, but people perform these process carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick ASUS Zenfone Max Pro M2 back to the previous working condition.

ASUS Zenfone Max Pro M2 Specifications:

Talking about the specifications, Asus Zenfone Max Pro M2 features a 6.3-inch full-HD+ IPS display with a screen resolution of 1080 x 2280 pixels. It is powered by 1.95GHz octa-core Qualcomm Snapdragon 660 Processor coupled with 4GB of RAM. The phone packs 64GB internal memory with an expandable storage support of 512GB via microSD card. The camera on the Asus Zenfone Max Pro M2 flaunts with dual rear camera with the 13-MP primary sensor and a 12-MP secondary sensor and selfies, the handset features a 5-MP camera sensor. It is backed by a Non-removable Li-Ion 5,000mAh battery.

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your ASUS Zenfone Max Pro M2
  • Flash Stock ROM to Fix the bootloop problem
  • Upgrade and Downgrade ASUS Zenfone Max Pro M2
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on ASUS Zenfone Max Pro M2
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

ASUS Zenfone Max Pro M2 Software Updates and Downloads:

Steps to Install ASUS Zenfone Max Pro M2 Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

  • List of Android Pie Supported Asus Devices

  • List of Supported TWRP Recovery for Asus Zenfone Devices

  • How To Fix Asus GPS Problem [Methods & Quick Troubleshoot]

  • How Fix Asus Battery Draining Problems – Troubleshooting and Fixes

  • Updated September 2020security patch

  • Update GMS version

Pre-Requisite:

  • Remember: Supported for ASUS Zenfone Max Pro M2 (ZB630KL | ZB631KL)
  • Charge your phone: Before you proceed with the below information, charge your ROG Phone to at least 50%.
  • Laptop or PC: To carry out the second method, you need a PC or Laptop.
  • Take Device Backup: The very first thing to pay attention to is taking the device backup. If you have are not able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.
  • Install Latest Driver: Install the Latest Asus USB Drivers. [For All Android USB Drivers]
  • Download ADB Drivers: For the Second method, you have to download ADB Fastboot drivers
  • Download: Download the below given required files on your PC.

Instructions to Install on ASUS Zenfone Max Pro M2:

[su_note note_color=”#fffde3″]Note: Make sure you have followed the steps properly. Don’t Skip and Read! – We are not responsible for any damage that you make to your phone.[/su_note]

Disclaimer: We are at GetDroidTips will not be responsible for any bricking/damage to your phone while/after installing this ROM.

Method 1 – Install via Recovery : 

  • First of all Download the zip file from above link and rename the file to update.zip.
  • Now Switch Off your device and reboot into recovery mode by pressing Power button +Volume UP button.
  • In recovery mode select apply update from sd card.
  • Now Choose update.zip file which you downloaded.
  • Wait until the installation process completes.
  • Once the installation process is completed and You can Reboot your ZenFone Max Pro.
  • That’s it, fellas! Done. you have upgraded your smartphone.

Method 2: Install via ADB Sideload

  • First of all Download the ADB and Fastboot drivers for Windows and Mac and extract it
  • Now move the downloaded OTA zip file to ADB Folder
  • Enable USB Debugging
  • To Enable USB Debugging, First of all, You need to activate Developer Option on your smartphone.
  • To activate, Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled”.
  • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging.
  • In your PC/Laptop, Open the extracted ADB Folder and Open Command Window by pressing Shift Key + Right Mouse Click.
  • Reboot your phone to recovery by pressing Volume UP + Power button.
  • Now connect the PC to Mobile with USB Cable.
  • Now enter the following command in the command window that you open
  • adb devices
  • This command will show if any device is connected properly. If it doesn’t show, then please check the drivers are installed properly or if the attached cable is damaged.
  • If your device is listed, then please type the below command in your command window.
  • adb sideload File_name.zip
  • Wait until the installation process completes.
  • Once the installation process is completed and You can Reboot your ZenFone Max Pro.
  • That’s it, fellas! Done. you have upgraded the Asus ZenFone Max Pro.

I hope you installed the Stock ROM on ASUS Zenfone Max Pro M2 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

adb devices

adb sideload File_name.zip